混凝土攪拌車控製室以及皮帶輸送機重要嗎？作為設備不可或缺的零部件，當然是非常的關鍵的，下麵小編為您分析一番。
Is the control room of concrete mixer truck and belt conveyor important? As an indispensable part of the equipment, it is of course very critical. The following is a brief analysis for you.
混凝土攪拌車控製室是神經中樞管理相當重要，主要表現與：
The control room of concrete mixer truck is very important for nerve center management, which mainly includes:
1、設備運行前，先對各計量的進行調零，按照砼配比單料預置稱量值，所有計量稱預置時，應充分考慮物料不同濕度下的落差後進行修正，使實際計量誤差控製到小，外加劑經計量後加入物料混合倉，保證砼質量。
1. Before the operation of the equipment, adjust the zero point of each measuring scale, preset the weighing value according to the concrete proportion of the single material. When preset all measuring scales, fully consider the fall of the material under different humidity, and then correct them to make the actual measurement error controlled to a small extent. After the admixture is measured, it is added into the material mixing bin to ensure the concrete quality.
2、砼產品在出料前，須與地麵聯係，確保有罐車接料時，進行下一步操作，防止砼的放空浪費。多種標號砼生產時，與地麵聯係好，防止出現產品混亂。
2. Before discharging concrete products, contact with the ground to ensure that the next operation is carried out when there is a tank truck to receive the materials, so as to prevent the emptying and waste of concrete. During the production of various grade concrete, contact the ground well to prevent product confusion.
3、實時觀察遠程儀表，發現異常現象及時通知有關人員，采取相應解決措施。
3. Observe the remote instrument in real time, notify relevant personnel in time and take corresponding measures in case of any abnormal phenomenon.
混凝土攪拌車的皮帶輸送機：
Belt conveyor of concrete mixer:
1、啟動前，觀察皮帶上有無異物，並於檢修人員及後台聯係且無問題後，方可啟動設備。
1. Before starting, observe whether there is any foreign matter on the belt, and contact the maintenance personnel and the backstage, and then start the equipment.
2、啟動後運轉3—5分鍾進行設備檢查，正常後再加物料，輸送帶上的物料沒有卸完時不得任意停機。
2. After starting, run for 3-5 minutes to check the equipment, and then add materials after it is normal. Do not stop at will until the materials on the conveyor belt have been unloaded.
3、保持輸送帶運行中無跑偏現象，托輥定期添加或更換潤滑油，皮帶清理刮板磨損及時更換。
3. Keep the conveyor belt running without deviation, add or replace lubricating oil on the carrier roller regularly, and replace the worn belt scraper in time.
通過以上的講解，相信您已了解它的重要性。為了在日常生產中對設備操控會更細心，了解有關部件使用是很有必要的。更多相關內容就來kaiyun網站http://www.skar-bnat.com谘詢吧！
Through the above explanation, I believe you have understood its importance. In order to control the equipment more carefully in daily production, it is necessary to understand the use of relevant components. Come to our website for more relevant content http://www.skar-bnat.com Ask!
