全自動攪拌車是一種重要的混凝土運輸設備，為了保證其正常使用和工作效率，需要及時更換以下幾個部件：
The fully automatic mixer truck is an important concrete transportation equipment. In order to ensure its normal use and work efficiency, the following components need to be replaced in a timely manner:
刹車片和刹車盤：刹車片在使用過程中會磨損，會導致刹車效果減弱，需要及時更換。同時，如果刹車盤出現龜裂、變形等情況也需要更換。
Brake pads and brake discs: The brake pads may wear out during use, which can weaken the braking effect and require timely replacement. At the same time, if the brake disc experiences cracks, deformation, etc., it also needs to be replaced.
輪胎：攪拌車是一種重載車輛，經常在坑窪、崎嶇的道路上行駛，輪胎容易磨損，需要定期更換。
Tires: A mixer truck is a type of heavy-duty vehicle that often travels on bumpy and bumpy roads, and tires are prone to wear and tear, requiring regular replacement.
發動機機油和機油濾芯：發動機是攪拌車的核心部件，機油和機油濾芯需要定期更換，保證發動機正常潤滑。
Engine oil and oil filter: The engine is the core component of the mixer truck, and the oil and oil filter need to be replaced regularly to ensure normal engine lubrication.
空氣濾清器、燃油濾清器和液壓油濾清器：這些濾清器可以防止雜質進入發動機、液壓係統和燃油係統，保證攪拌車的正常運行。
Air filter, fuel filter and hydraulic oil filter: these filters can prevent impurities from entering the engine, hydraulic system and fuel system, and ensure the normal operation of the mixer.
油封和軸承：油封和軸承是攪拌車的關鍵部件，需要定期更換，避免出現漏油、磨損等問題。
Oil seals and bearings: Oil seals and bearings are key components of the mixer truck and need to be replaced regularly to avoid problems such as oil leakage and wear.
機油濾清器：攪拌車的機油濾清器的功能是過濾掉機油中的碎屑，膠體和水分，因此應將其更換為機油。如果不更換，油將無法過濾，這將導致攪拌車的內部零件由於油中的雜質而加速磨損。
Oil filter: the function of the oil filter of the mixer truck is to filter out the debris, colloid and moisture in the engine oil, so it should be replaced with engine oil. If not replaced, the oil will not be filtered, which will lead to accelerated wear of the internal parts of the mixer truck due to impurities in the oil.
如果嚴重阻塞空氣過濾器濾芯，則進氣阻力會增加，發動機功率會降低。同時，由於空氣阻力的增加，吸入的汽油量也將增加，導致混合比過高，這將使發動機運行變差，增加燃油消耗並容易產生焦炭。通常，您應該養成經常檢查空氣濾清器濾芯的習慣。
If the air filter element is severely blocked, the intake resistance will increase and the engine power will decrease. At the same time, due to the increase in air resistance, the amount of gasoline sucked in will also increase, resulting in a high mixing ratio, which will worsen engine operation, increase fuel consumption, and easily produce coke. Usually, you should develop the habit of regularly checking the air filter element.
製動液：製動液是一種液體介質，可在攪拌車的液壓製動係統中傳遞製動壓力。用於使用液壓製動係統的車輛。由於製動液壓係統必須使製動液與大氣連通才能正常運行，長期運行會導致製動液在高溫下吸收水分並變成氣泡，從而導致製動速度下降攪拌車的效率。因此，為安全起見，駕駛員應定期檢查製動液並及時更換。建議每兩年或行駛50，000公裏時進行更換。需要注意的是，不要混用不同類型和品牌的製動液，否則會降低製動效率。
Brake fluid: Brake fluid is a liquid medium that can transmit brake pressure in the hydraulic braking system of a mixer truck. For vehicles using hydraulic braking systems. Due to the fact that the brake hydraulic system must connect the brake fluid to the atmosphere for normal operation, long-term operation can cause the brake fluid to absorb moisture and become bubbles at high temperatures, resulting in a decrease in braking speed and the efficiency of the mixer truck. Therefore, for safety reasons, drivers should regularly check the brake fluid and replace it in a timely manner. It is recommended to replace it every two years or 50000 kilometers. It should be noted that different types and brands of brake fluid should not be mixed, otherwise it will reduce braking efficiency.
以上是攪拌車需要定期更換的關鍵部件，及時更換可以保證攪拌車的正常運行和延長其使用壽命。更多相關內容就來kaiyun網站http://www.skar-bnat.com谘詢吧！
The above are the key components that need to be replaced regularly on the mixer truck. Timely replacement can ensure the normal operation of the mixer truck and extend its service life. For more related content, come to our website http://www.skar-bnat.com Consult!
