春夏是多雨的季節，對於雨季的到來，很多司機內心都是拒絕的。下雨天除了會降低行車安全，還會耽誤很多的工作。那麽雨季來了，全自動攪拌車該如何應對？
Spring and summer are rainy seasons. Many drivers refuse the arrival of the rainy season. In addition to reducing driving safety in rainy days, it will also delay a lot of work. So when the rainy season comes, how should the fully automatic mixer deal with it?
在雨季工作的時候，重要的就是預防工作，出車的前一天，應該對天氣狀況有一個詳細的了解。雖然天氣預報可能是個“坑”，但是心裏有所準備還是很有必要的。
When working in rainy season, it is important to take preventive measures. The day before driving, you should have a detailed understanding of the weather conditions. Although the weather forecast may be a "pit", it is necessary to be prepared.
在出車前要對車輛發動機、底盤、輪胎、刹車、雨刷、空調、液壓係統、攪拌裝置等進行認真的檢查，排除故障，以保證其能正常的工作。駕駛室也應該常備遮雨裝備，以防不時之需。同時，要保證水箱裏有足夠的水，並隨車帶上減水劑方便對混凝土進行調和。
Before driving out, the engine, chassis, tires, brakes, wipers, air conditioners, hydraulic systems, mixing devices, etc. of the vehicle shall be carefully checked to eliminate faults to ensure their normal operation. The cab should also be equipped with rain-proof equipment in case of emergency. At the same time, it is necessary to ensure that there is enough water in the water tank, and carry water reducing agent with the vehicle to facilitate the mixing of concrete.
在啟動車輛前，要確保攪拌車的罐體處於停止位置，以防車輛啟動後減速機以及液壓係統壓力過大造成損壞。
Before starting the vehicle, ensure that the tank body of the mixer is in the stop position to prevent damage caused by excessive pressure of the reducer and hydraulic system after the vehicle is started.
如果很不幸的，在運輸途中遭遇雨雪天氣，千萬不要著急，不要因為怕影響混凝土的質量而高速前行。首先要做的就是減速慢行，確保自己的人身安全，確認刹車是否處於正常工作狀態。因為當車行駛到潮濕路麵的時候，車輪的抓地力會隨車速的增加而急劇變小，所以應該采取“點刹”的方式，讓車輛在不失控的情況下降低行車速度。
If you are unlucky and encounter rainy and snowy weather during transportation, don't worry. Don't move forward at high speed for fear of affecting the quality of concrete. The first thing to do is to slow down, ensure your personal safety, and confirm whether the brake is in normal working condition. Because when the vehicle is driving on a wet road, the grip of the wheels will decrease sharply with the increase of the vehicle speed, so the way of "braking" should be adopted to reduce the vehicle speed without losing control.
對於沒有硬化的道路，好不要冒然前行，否則可能會陷入泥濘之中。遇到積水路麵的時候，應該在觀察之後確認安全再通行，對於不熟悉的路程，應該順著前車的路線行駛。
For roads that are not hardened, do not venture forward, or you may fall into mud. When encountering a waterlogged road, you should make sure that it is safe to pass after observation. For unfamiliar journeys, you should follow the route of the vehicle in front.
根據情況，及時打開大燈、霧燈和雙閃，以警示過往車輛，增加安全係數。轉彎前降低行車速度，調慢罐子的轉速，盡可能的轉大彎，因為攪拌車的重心高，易側翻。在駛出積水路麵的時候，可以輕踏刹車踏板，讓刹車片和刹車盤上的水分得到及時的蒸發，恢複製動效果。如果雨勢比較大，為了保證行車安全，好選擇有遮擋的地方避雨，確保混凝土的質量。
According to the situation, turn on the headlights, fog lights and double flashing lights in time to warn the passing vehicles and increase the safety factor. Before turning, reduce the driving speed, slow down the speed of the can, and turn the turn as far as possible, because the center of gravity of the mixer truck is high and it is easy to roll over. When driving out of the waterlogged road, you can gently step on the brake pedal to make the moisture on the brake pad and brake disc evaporate in time and restore the braking effect. If the rain is heavy, in order to ensure driving safety, it is better to choose sheltered places to avoid rain and ensure the quality of concrete.
在到達目的地的時候也不能大意，雨後的工地上都比較濕滑，確保安全之後再前行，注意工地上的鋼筋，石塊等雜物對輪胎的影響。放料過程中好自己能盯著，休息也不差這一會，如果出現什麽差錯，就得不償失了。卸完之後，要仔細的衝洗攪拌罐，以防混凝土粘在罐體上，發生凝固後無法清除的情況。
Don't be careless when you arrive at the destination. The construction site is wet and slippery after the rain. You can move forward after ensuring safety. Pay attention to the impact of reinforcement, stones and other debris on the tires. During the feeding process, you should be able to keep an eye on it and take a rest. If there is any mistake, you will lose more than you gain. After unloading, the mixing tank shall be washed carefully to prevent concrete from sticking to the tank body, which cannot be removed after solidification.
由於環境汙染，雨水往往會對車輛造成腐蝕。電路、車燈等小件也可能會受到影響，所以在雨停之後，卡友們應該認真的檢查一些容易受到雨水影響的部分，比如：儀表、操縱杆、萬向軸、液壓係統等。如果發現有什麽異常現象，要及時的維修保養，以保證下次攪拌車能的正常、安全運作。更多相關內容就來kaiyun網站http://www.skar-bnat.com谘詢吧！
Due to environmental pollution, rain often causes corrosion to vehicles. Small parts such as circuits and lights may also be affected, so after the rain stops, card users should carefully check some parts that are easily affected by the rain, such as instruments, joysticks, universal shafts, hydraulic systems, etc. If any abnormal phenomenon is found, timely repair and maintenance shall be carried out to ensure the normal and safe operation of the mixer next time. Come to our website for more relevant content http://www.skar-bnat.com Ask!
