The market defects of the unified mixer truck are mainly reflected in the difference of the environment. The road conditions of the construction site and other places where the concrete mixer truck goes in and out are complex. Affected by the construction, the road is generally narrow and the road environment is not good. The average bicycle is OK. The semi-trailer is more difficult to drive and has a larger turning radius. It is not suitable for entering and leaving the construction site. Especially at the construction site, if it rains and the road is muddy, the semi-trailer is more likely to slip and sink.
2.6方自動上料攪拌車的出現，解決了這些建築施工難題。自動上料攪拌車是由山東魯樽機械自主研發的一款多功能混凝土上料攪拌一體車。
The emergence of 2.6 party automatic loading mixer has solved these building construction problems. Automatic loading mixer is a multifunctional concrete loading mixer independently developed by Shandong Lutun machinery.
2.6方自動上料攪拌車在使用之前為了確保正常的運行過程，需要對設備提前做一定檢查工作的。那麽接下來就讓kaiyun一起了解一下當設備在運行之前有哪些問題是需要kaiyun檢查了解的。
2.6 in order to ensure the normal operation process of our automatic feeding mixer, we need to check the equipment in advance. Next, let's find out what problems we need to check before the equipment runs.
1、蓄電池的保養檢查：檢查蓄電池固定是否牢固。
1. Maintenance and inspection of battery: check whether the battery is fixed firmly.
2、輪胎的檢查：每月應在常溫下檢查一下輪胎氣壓。
2. Tire inspection: check the tire pressure at normal temperature every month.
3、離合器的檢查：離合器液麵處於高、低液麵間是代表正常的，要是低於標準線，可能是總泵或分泵的皮碗有問題。
3. Inspection of clutch: if the clutch liquid level is between high and low, it means normal. If it is lower than the standard line, there may be a problem with the leather cup of the master cylinder or slave cylinder.
4、製動液麵的檢查：製動液在高、低位之間則表示正常。
4. Inspection of brake fluid level: if the brake fluid is between high and low, it indicates that it is normal.
5、發動機冷卻液液麵檢查：發動機在政策狀態時，一定不要打開散熱器，可能會被濺出的冷卻液或高溫蒸氣燙傷。等發動機冷卻後，檢查冷卻液的液麵是在什麽位置，看是否需要加蒸餾水或純淨水或冷凍液，加水後的高度不能超過滿位。發現短時間內冷卻液減少的很快，應檢查冷卻設備是否有泄漏或直接到維修站去看。
5. Engine coolant level inspection: when the engine is in the policy state, do not open the radiator, which may be scalded by splashed coolant or high-temperature steam. After the engine cools down, check the position of the coolant level to see if distilled water or purified water or refrigerant needs to be added. The height after adding water shall not exceed the full position. If it is found that the coolant decreases rapidly in a short time, check the cooling equipment for leakage or go directly to the maintenance station.
2.6方料攪拌機操作環境通常都不是很好，這也導致需要kaiyun對設備在操作之前有詳細的了解才行。在確保設備不存在有任何故障問題之後才能夠操作使用設備正常運行，避免在操作中可能存在的各種不良問題。
2.6 the operating environment of the square material mixer is usually not very good, which also requires us to have a detailed understanding of the equipment before operation. The equipment can be operated and used only after it is ensured that there is no fault problem, so as to avoid various adverse problems that may exist in operation.
