隨著近幾年的技術成熟，小型混凝土攪拌車為了生產混凝土的新興機械設備，在環保日益嚴格的今天，攪拌車效率高、更便利、省錢又賺錢，一係列的亮點深得工程老板們的心，那麽在使用時要注意什麽呢？
With the maturity of technology in recent years, in order to produce new mechanical equipment for concrete, small concrete mixer truck is becoming more and more strict in environmental protection. Today, mixer truck has high efficiency, more convenience, saving money and making money. A series of highlights have won the hearts of Engineering bosses. What should we pay attention to when using it?
上料時，沙子、石子會與上料鏟鬥存在摩擦，底部及內部形成劃痕，另外需要注意的就是車身上螺絲部位會變鬆。
When loading, sand and stones will rub with the loading bucket, and scratches will be formed at the bottom and inside. In addition, it should be noted that the screws on the vehicle body will become loose.
攪拌車工作的場所大多是崎嶇不平的土路、布滿石子的山路、時不時的上坡路，頻繁的震蕩抖動下，連接零部件間的螺絲會變鬆，影響攪拌車的工作效率，造成一定不良影響，因此，工人們要時常檢查並擰緊鬆弛的螺絲，避免危害的形成。
Most of the workplaces of the mixer truck are rugged dirt roads, mountain roads full of stones and uphill roads from time to time. Under frequent vibration and shaking, the screws between connecting parts will become loose, affecting the working efficiency of the mixer truck and causing certain adverse effects. Therefore, workers should often check and tighten the loose screws to avoid the formation of harm.
此外，攪拌車的空氣濾芯及柴油濾芯也需要時常檢查，一旦空氣濾芯及柴油濾芯阻塞，將會造成發動機功率的下降及內部零件的磨損，時常更換保養將避免此類問題的產生，刹車片、減震器、燃油泵在使用一定時間之後也需要更換、檢修及清洗，保證施工順利進行。
In addition, the air filter element and diesel filter element of the mixer also need to be checked from time to time. Once the air filter element and diesel filter element are blocked, the engine power will be reduced and the internal parts will be worn. Frequent replacement and maintenance will avoid such problems. The brake pads, shock absorbers and fuel pumps also need to be replaced, overhauled and cleaned after using for a certain time to ensure the smooth progress of construction.
其實，攪拌車的弱點除了鏟鬥的摩擦劃痕外，其餘部件經常進行檢修即可保證正常的運作，當然，選擇嚴謹專業的小型混凝土攪拌車生產廠家也是非常重要的。
In fact, in addition to the friction scratch of the bucket, the other parts of the mixer can be repaired frequently to ensure normal operation. Of course, it is also very important to select a rigorous and professional manufacturer of small concrete mixer.
此外操作小型混凝土攪拌車注意裝料前，應先排淨拌筒內殘存的積水和雜物。在運輸過程中要不停的轉動，以防混凝土離析。混凝土攪拌運輸車到達工地和卸料之前，應先使拌筒全速以14—18轉/分轉動1—2分鍾，然後再進行反轉卸料。反轉之前，應使攪拌筒停穩，然後再開啟反轉。
In addition, when operating the small concrete mixer, pay attention to drain the residual ponding and sundries in the mixing drum before loading. Keep rotating during transportation to prevent concrete segregation. Before the concrete mixer truck arrives at the construction site and unloading, first rotate the mixing drum at full speed at 14-18 rpm for 1-2 minutes, and then reverse unloading. Before reversing, the mixing drum shall be stopped stably, and then the reversing shall be started.
工作時，不得將手伸入小型混凝土攪拌車的攪拌筒內，嚴禁將手伸入主卸料溜槽和加長卸料溜槽的連接部位攪拌，以免發生事故。更多相關內容就來網站www.skar-bnat.com進行谘詢吧！
When working, do not put your hand into the mixing drum of the small concrete mixer, and do not put your hand into the connecting part of the main discharge chute and the extended discharge chute for mixing, so as to avoid accidents. For more information, please visit www.skar-bnat.com Com for consultation!
