混凝土攪拌車的零部件在設備的使用過程中起著重要的作用，如果任何一個部件出現了磨損等問題，那麽機械設備的工作效果就會受影響，那麽混凝土攪拌車電機發熱是怎麽回事？
The parts of the concrete mixer car play an important role in the use of equipment, if any of the parts wear and other problems, then the working effect of mechanical equipment will be affected, so how is the heat of the motor of the concrete mixer car?
混凝土攪拌車使用後電機發熱嚴重的原因：攪拌車電機繞組散熱來不及通過外殼散熱。混凝土攪拌車電機外殼散熱能力差。這兩個因素都會導致電機因過熱而燒毀。
The reason why the motor heating is serious after the use of concrete mixer is that the heat dissipation of the motor winding of the mixer is too late to pass the heat dissipation of the shell. The heat dissipation capacity of motor shell of concrete mixer truck is poor. Both factors can cause the motor to overheat and burn out.
以上兩個因素導致電機過熱。根本原因是：
These two factors cause the motor to overheat. The root cause is:
混凝土攪拌車電機繞組發熱過多。根本問題是電機線不是純銅線。純銅線導電性強，電阻低，所以發熱少。如果使用其他材料發熱時電機的電阻較大；
The motor windings of concrete mixer are heating too much. The fundamental problem is that the motor wire is not pure copper wire. Pure copper wire conductivity is strong, low resistance, so less heat. If the use of other materials heating resistance of the motor is larger;
混凝土攪拌車運行後，電機外殼散熱能力差，根本原因是外殼不是純鋁。合金鋁重量輕，散熱能力強。電機外殼采用其他材料，散熱能力不如鋁。
After the operation of concrete mixing truck, the heat dissipation capacity of motor shell is poor, the fundamental reason is that the shell is not pure aluminum. Alloy aluminum is light in weight and good in heat dissipation. The motor shell is made of other materials, which is not as good as aluminum in heat dissipation.
另外，在機器使用的過程中，如果出現了噪音過大或者是各種各樣的問題，那麽此時就一定要首先看一下機械密封總成是否出現了問題，因為這是整個機械當中較容易出現故障的情況。
In addition, in the process of using the machine, if there is too much noise or a variety of problems, then we must first look at the mechanical seal assembly at this time whether there is a problem, because this is the whole machine is more prone to failure.
原因就是因為內部的磨損較為嚴重，或者是密封性較差導致的，這時候應該看一下軸承以及各種零部件的有關尺寸是否出現了明顯的變化，如果都沒有出現這些問題，那麽基本上就可以排除這一方麵出現了故障。
The reason is because the internal wear is more serious, or is caused by poor sealing, at this time we should look at the bearing and the relevant size of various parts and components whether there is a significant change, if there are no these problems, then basically you can rule out this aspect of the failure.
所以，如果混凝土攪拌車出現某一個方麵的問題，用戶需要重視起來，不能有僥幸心理，及時進行維修才是科學合理的做法。更多內容就來www.skar-bnat.com這裏谘詢吧。
Therefore, if the concrete mixer appears a certain aspect of the problem, users need to pay attention to, can not have a fluke psychology, timely maintenance is a scientific and reasonable approach. For more information, visit www.skar-bnat.com.
