小型混凝土攪拌車的車門是需要密封條來發揮作用的，避免了小縫隙的出現，如果有小縫隙，那麽就會被外麵的風沙沙粒填滿引起腐蝕。那麽小型混凝土攪拌車的密封條怎麽維護好呢？
The door of a small concrete mixer needs to be sealed to play a role, avoiding the appearance of small gaps. If there are small gaps, they will be filled with sand outside and cause corrosion. So how to maintain the sealing strip of the small concrete mixer?
檢查小型混凝土攪拌車的密封件是否有較大的裂縫。如果密封破損，可以用粘合劑修複。特別是，大裂縫帶隻需使用密封的特殊粘合劑即可簡單地填充。當然，如果密封件嚴重損壞或老化，請更換新的。
Check whether there are large cracks in the seal of small concrete mixer truck. If the seal is broken, it can be repaired with adhesive. In particular, large crack zones can be filled simply by using a special sealing adhesive. Of course, if the seal is seriously damaged or aged, please replace it with a new one.
用混凝土清潔劑清潔門窗密封條後，司機會塗上一層滲透保護劑，避免密封條的風化，大大提高密封條的密封功能。除此之外，擋風雨條之間的縫隙隻是充滿了灰塵和鐵鏽，可以用刷子清除。
After cleaning the door and window seals with concrete cleaner, the driver will apply a layer of penetrant protective agent to avoid the weathering of the seals and greatly improve the sealing function of the seals. Otherwise, the gaps between the weatherstripping are just filled with dust and rust that can be removed with a brush.
車門和車身的密封是一個比較困難的部分。密封要求比較嚴格。需要密封的部分比較長，每個密封部分的橫截麵形狀不同，門經常翻開和關閉。自動上料攪拌機上安裝三通和四通密封，安裝前支柱和頂梁側梁四個密封結構。這種多道密封條通常放置在前門縫處，除了起到密封作用外，還具有降低汽車噪音的作用。
The sealing of the door and body is a difficult part. The sealing requirements are strict. The sections that need to be sealed are longer, each section of the seal has a different cross section shape, and the door is often opened and closed. Three way and four way seal are installed on automatic feeding mixer, and four sealing structures of front pillar and top beam side beam are installed. This multi-channel sealing strip is usually placed in the front door seam, in addition to playing a sealing role, but also has the role of reducing car noise.
小型混凝土攪拌車的車窗玻璃損壞後，司機在更換玻璃時應檢查密封條是否損壞。由於窗戶在修複後往往無法恢複原狀，因此除了確保窗戶玻璃可以簡單地拉動或提起外，還必須注意窗戶玻璃周圍的密封。如果玻璃與玻璃容器的間隙不均勻，橡膠條與玻璃與玻璃容器接觸不良，司機用手輕鬆拉動密封圈。
After the window glass of small concrete mixer is damaged, the driver should check whether the sealing strip is damaged when replacing the glass. In addition to ensuring that the window glass can be simply pulled or lifted, attention must be paid to sealing around the window glass as it often does not return to its original shape after repair. If the gap between glass and glass container is not uniform, and the rubber strip is in poor contact with glass and glass container, the driver can easily pull the sealing ring by hand.
所以說在使用小型混凝土攪拌車進行工作時一定要注意維護方法，千萬不能因為它們小就忽略它們，隻要kaiyun平時的工作做到位，就可以它的延長使用壽命。更多內容就來網站www.skar-bnat.com谘詢吧！
So in the use of small concrete mixing truck work must pay attention to the maintenance method, do not ignore them because they are small, as long as we do our usual work, you can extend its service life. More content to the website www.skar-bnat.com consultation!
