The temperature of the automatic shovel mixer increases naturally due to the long-term uninterrupted operation in the process of use and use. However, if the temperature exceeds the temperature that the equipment can bear, the equipment will be damaged. Therefore, if the equipment temperature is too high, corresponding maintenance work is required, so let's have a look.
1.防止發動機過熱：由於環境溫度較高，因此發動機容易過熱。加強對發動機冷卻係統的檢查和維護，包括檢查水箱，恒溫器，水泵，風扇等零件，並注入冷卻水以觀察是否及時增加。當水溫超過100°C時，請在涼爽的地方停下來冷卻，以怠速運轉發動機，然後打開引擎蓋進行散熱。
1. Prevent the engine from overheating: due to the high ambient temperature, the engine is easy to overheat. Strengthen the inspection and maintenance of engine cooling system, including inspection of water tank, thermostat, water pump, fan and other parts, and inject cooling water to observe whether it is added in time. When the water temperature exceeds 100 ° C, please stop in a cool place to cool down, run the engine at idle speed, and then open the engine cover for heat dissipation.
2.防止發動機爆炸：夏天很熱，有時可能會超過35°C，但是在這個季節中，零件過時的汽車發生自然爆炸的可能性更高。好了
2. Prevent engine explosion: it is very hot in summer, sometimes it may exceed 35 ° C, but in this season, cars with outdated parts are more likely to have natural explosion. okay
3.防止損壞汽車漆：當暴露在強烈的陽光下時，汽車漆會老化並起皺。普通的美容蠟具有防曬作用，但是所有汽車蠟均包含矽。因此，它會持續很長時間。紫外線腐蝕塗料，留下黑點。車蠟本身沒有硬度或紫外線保護作用，但一旦變熱便會消失，因此請盡可能將其停放在涼爽的地方。
3. Prevent damage to car paint: when exposed to strong sunlight, automotive paint will age and wrinkle. Common beauty waxes have sunscreen effects, but all car waxes contain silicon. As a result, it will last a long time. Ultraviolet light corrodes the paint, leaving black spots. The wax itself has no hardness or UV protection, but it will disappear once it gets hot, so please park it in a cool place as much as possible.
4.防止輪胎破裂：溫度高，容易破裂，如果溫度過高，輪胎會變形，拉伸強度容易降低。至於輪胎本身，如果在非標準氣壓，輪胎老化，性能下降或駕駛過程中行駛時，汽車在硬質金屬或其他硬物上滾動，汽車會突然爆裂。
4. Prevent tire from cracking: high temperature, easy to crack, if the temperature is too high, the tire will deform and the tensile strength is easy to reduce. As for the tire itself, if the car rolls on hard metal or other hard objects under non-standard pressure, tire aging, performance degradation or driving, the car will burst suddenly.
5.防止發動機潤滑失效：在高溫下，發動機油的粘度降低，抗氧化性降低，導致潤滑不良。因此，應經常檢查機油的數量和質量，並及時添加或更換。注意及時清潔機油濾清器和散熱器，確保機油沒有被堵塞並且熱量散發良好，並避免了發動機過載。
5. Prevent engine lubrication failure: under high temperature, the viscosity of engine oil decreases and the oxidation resistance decreases, resulting in poor lubrication. Therefore, the quantity and quality of engine oil should be checked frequently and added or replaced in time. Pay attention to clean the oil filter and radiator in time to ensure that the oil is not blocked and the heat is well distributed, and avoid engine overload.
6.防止製動器故障：在高溫環境下，製動液會蒸發並容易蒸發，從而在製動管路中產生空氣阻力。此外，製動蹄很容易磨損，導致製動故障。因此，應經常檢查和調整製動係統，並注意在長的斜坡上停車和幹燥製動器，以確保良好的製動性能。如果製動輪轂很熱，請停止並冷卻，但不要倒入冷水以防止損壞製動輪轂。
6. Prevent brake failure: in high temperature environment, the brake fluid will evaporate and easily evaporate, which will produce air resistance in the brake pipeline. In addition, the brake shoes are easy to wear, resulting in brake failure. Therefore, it is necessary to check and adjust the brake system frequently, and pay attention to parking and drying the brake on long slopes to ensure good braking performance. If the brake hub is hot, stop and cool, but do not pour in cold water to prevent damage to the brake hub.
