As a means of transportation, the automatic feeding mixer must comply with the maintenance and repair regulations of the Ministry of transportation. We will carry out maintenance and repair according to the actual situation of automatic feeding mixer. For regular maintenance, in addition to regular maintenance of vehicle engine, chassis and other parts of automatic feeding mixer, the following maintenance work must also be performed.
1.合理確定保護期：汽車的保護期為汽車的距離，行駛裏程或保護時間。
1. Reasonably determine the protection period: the protection period of the car is the distance, mileage or protection time of the car.
在實際應用過程中，車主應參考汽車製造商建議的保護周期，聯係車輛的技術和使用條件，並適當調整保護周期。一般而言，新車在良好的道路條件下使用，不需要經常進行保護，並且可以在製造商規定的保護期內使用。然而，如果車輛技術不足或應用條件不好，則必須適當縮短保護期。
In the process of practical application, the vehicle owner should refer to the protection cycle recommended by the automobiles manufacturer, contact the technology and service conditions of the vehicle, and adjust the protection cycle appropriately. Generally speaking, new cars can be used under good road conditions without frequent protection, and can be used within the protection period specified by the manufacturer. However, if the vehicle technology is insufficient or the application conditions are not good, the protection period must be appropriately shortened.
2.充分應用免費檢查：混凝土攪拌車製造商發起的免費檢查活動通常對業主有利。車主可以使用這些檢查活動對自己喜歡的汽車進行特定的身體檢查，以實時發現，消除和保存潛在的問題。將來會出現高昂的維護和保護成本。
2. Make full use of free inspection: free inspection activities initiated by concrete mixer truck manufacturers are usually beneficial to owners. Car owners can use these inspection activities to carry out specific physical examination on their favorite cars, so as to discover, eliminate and save potential problems in real time. There will be high maintenance and protection costs in the future.
3.最大程度地減少維護組件的故障。許多混凝土攪拌機的所有者都有這種感覺。撞車和維修後，汽車喜歡的特定組件將失去控製，從而導致車輛進入早期維護期。呈現這種場景的原因主要與修理工的組裝技術和配件質量有關。因此，請防止維修總成發生故障，應用各種先進技術的保護設備和技巧來保護您的汽車免於拆卸，防止對汽車的總成和零件造成不必要的損壞，從而提高保護和維護的質量。最好減少總計花費。
3. Minimize maintenance component failures. Many owners of concrete mixers have this feeling. After the crash and repair, the specific components that the car likes will lose control, leading to the early maintenance period of the vehicle. The reason for this scenario is mainly related to the assembly technology of the repairman and the quality of the parts. Therefore, please prevent the failure of the maintenance assembly, apply various advanced technology protection equipment and techniques to protect your car from disassembly, and prevent unnecessary damage to the assembly and parts of the car, so as to improve the quality of protection and maintenance. It's better to reduce the total cost.
除上述知識外，在混凝土捏合試驗中運輸混凝土後，通常用水清洗攪拌筒的內部，以防止硬化的混凝土占據空間並減小攪拌筒的體積。設備的合理運行和維護會有效阻礙在建設備的良好性能。
In addition to the above knowledge, after transporting the concrete in the concrete kneading test, the inside of the mixing drum is usually cleaned with water to prevent the hardened concrete from occupying the space and reduce the volume of the mixing drum. The reasonable operation and maintenance of the equipment will effectively hinder the good performance of the equipment under construction.
自動上料攪拌車的售後維護十分到位，歡迎選購！
Automatic feeding mixer after-sales maintenance is in place, welcome to purchase!
