1. Mixing unit: the maximum capacity of mixing bin is 3450 liters, and the concrete output is 2.5 meters per time. Double helix structure. Hydraulic motor, planetary gear drive. Forward and reverse rotation realize mixing and discharging. The mixing drum rotates 300 ° and the concrete is poured at a height of more than 1.9 meters around the vehicle.
2、發動機：珀金斯渦輪增壓柴油機 1104 D-44 TA, 水冷式四缸，最大功率 62.5千瓦， 84馬力。後置。
2. Engine: Perkins turbocharged diesel 1104 d-44 TA, water-cooled four cylinder, maximum power 62.5 kW, 84 HP. Post.
3、傳動係統； 采用德國博士 力士樂液壓元件。 發動機帶動2套係統（4驅動行走和攪拌）工作。
3. Transmission system; Germany doctor Rexroth hydraulic components are adopted. The engine drives 2 sets of systems (4 drive walking and mixing) to work.
4、速度： 工作速度0－9公裏/小時， 路上行走速度 0－25公裏/小時。
4. Speed: working speed 0-9 km / h, walking speed 0-25 km / h.
5、駕駛席：前置具有國際Rops-Fops(防翻滾-防墜落)保護標準雙開門司機室。
5. Driver's seat: double door cab with international ROPS FOPS (rollover fall protection) protection standard in front.
6、液壓係統： 3回路，2個可變輸出泵 分別帶動傳動係統和 回轉係統。2齒輪泵負責進出過濾係統，和水熱油的熱交換。
6. Hydraulic system: 3 loops, 2 variable output pumps drive the transmission system and the rotary system respectively. 2 gear pump is responsible for in and out of the filtration system, heat exchange with water, heat and oil.
7、操縱杆： 料鬥的所有液壓控製動作由一個操縱杆完成。
7. Control lever: all hydraulic control actions of hopper are completed by one control lever.
8、計量： 電子稱重單元為可選部件，具有司機室輸出打印功能。
8. Measurement: the electronic weighing unit is an optional component with the output and printing function of the cab.
9、布料鬥： 400立升帶有液壓控製閘門的料鬥。
9. Hopper: 400 liter hopper with hydraulic control gate.
10、出料滑道： 液壓控製可回轉.由2個銷軸固定，易拆卸來增加卸料高度。
10. Discharge chute: hydraulic control, rotatable. Fixed by two pins, easy to disassemble to increase the discharge height.
11、供水： 車載水供應係統，附帶水表，高壓水槍（可選件）
11. Water supply: vehicle water supply system, with water meter, high pressure water gun (optional)
12、可爬行坡度：滿載時30％
12. Crawling slope: 30% at full load
13、製動係統： 油浴式盤式製動器。雙軸不同回路控製。 負液壓停車製動係統
13. Brake system: oil bath disc brake. Two axis different loop control. Negative hydraulic parking brake system
14、輪胎：工程工業用胎12.5-20 PR 12.
14. Tire: engineering tire 12.5-20 PR 12
15、轉向係統： 靜流體液壓 3向轉向，回轉半徑內部 1500mm 外部3500mm
15. Steering system: hydrostatic hydraulic 3-way steering, turning radius 1500mm inside and 3500mm outside
16、電力係統： 12V 120 Ah 電池提供路上照明和發動機啟動，緊急製動
16. Power system: 12V 120 ah battery provides road lighting and engine starting, emergency braking
17、油，水箱：水 2×270立升 ， 柴油 105立升，液壓油 80立升。
17. Oil, water tank: water 2 × 270 liter, diesel 105 liter, hydraulic oil 80 liter.
18、底盤： 滿足工程需要特製鋼質底盤
18. Chassis: special steel chassis to meet engineering needs
19、重量：6100公斤 均勻分布在2軸上。
19. Weight: 6100 kg, evenly distributed on 2 axes.
20、安全規範：本機械配備自動檢測和滿載自動鎖死閥門係統。如鏟臂工作時，可自動控製攪拌筒旋轉。
20. Safety specification: This machine is equipped with automatic detection and full load automatic locking valve system. If the shovel arm is working, it can automatically control the rotation of the mixing drum.
混凝土攪拌車今日為大家分享了以上的內容，更多內容詳情請聯係kaiyun：http://www.skar-bnat.com，kaiyun還有很多後續的內容為您呈現.
Concrete mixer shared the above content for you today. For more details, please contact us: http://www.skar-bnat.com We have a lot of follow-up content for you
